How To Eject Water From Android Speaker

How to Eject Water from Android Speaker

Android got wet? Water in the speaker causes muffled, crackling, or completely silent sound. This guide covers every Android brand — Samsung, Xiaomi, Realme, OnePlus, Oppo, Vivo, Motorola, and Pixel — with exact steps to eject water from speaker in 30 seconds using sound frequency technology.

Select Your Android Brand

All brands below use the same Fix My Speaker tool. Select your brand to jump to specific steps.

📱

Samsung

S / A / M series

📱

Xiaomi

Mi / Redmi / POCO

📱

Realme

C / GT / Narzo

📱

OnePlus

Nord / Pro series

📱

Oppo

A / Reno / Find

📱

Vivo

Y / V / X series

📱

Motorola

Moto G / Edge

📱

Pixel

Pixel 6 / 7 / 8 / 9

Fastest Method — Sound Frequency Tool

High frequency sound waves create vibrations inside the speaker cavity. These vibrations physically push water droplets out through the speaker grille holes. The same technology is used in professional water resistant device testing.

⚠️ Do NOT put your Android phone in rice. Rice absorbs humidity in the air — not water trapped inside the speaker. It can push rice dust further into the grille and make damage worse.

Turn your Android volume to maximum using the side volume button
Open the Fix My Speaker tool on this page
Hold your phone with the speaker facing downward toward the floor
Press Start and let the tool run for 30 seconds
Run the tool 2 to 3 times for the best results
Leave phone in dry place for 1 hour before charging

💧 Eject Water from Android Speaker Now Free tool — works on all Android brands — no app needed

Fix My Speaker →

Samsung Galaxy S series phones are IP68 rated — water resistant up to 1.5 metres for 30 minutes. However IP68 does not protect against saltwater, pool water or pressurised water. The S24 Ultra and S23 Ultra have stereo speakers — both bottom and top speakers may need ejecting.

📱 S24 Ultra 📱 S23 Ultra 📱 S24 📱 S23 📱 A55 📱 A35

💡 Samsung One UI tip — after ejecting water go to Settings → Sounds → Sound quality and effects and run the Adapt Sound test to confirm speaker is back to full quality.

Eject Water — Samsung →

Xiaomi and Redmi phones vary widely in water resistance. Flagship Xiaomi 14 series has IP68. Most Redmi budget models have no official IP rating — but they still respond well to the sound ejection tool. Sound from phone speaker Xiaomi comes from the bottom right side.

📱 Xiaomi 14 📱 Redmi Note 13 📱 POCO X6 📱 Redmi 13C

⚠️ Redmi budget models have no IP rating. If your Redmi got submerged in water — use the tool immediately and do not charge until fully dry.

Eject Water — Xiaomi →

Realme GT series has IP54 splash resistance. Most Realme C and Narzo series have no IP rating. Despite this, the sound frequency tool works effectively to eject water from the phone speaker realme.

📱 Realme GT 6 📱 Realme C67 📱 Narzo 70 📱 Realme 12 Pro

Eject Water — Realme →

OnePlus 12 has IP65 rating. Oppo Find X series has IP68. Vivo X series has IP68. All three brands share similar speaker grille designs at the bottom of the phone. The sound tool works identically on all three brands.

📱 OnePlus 12 📱 Oppo Find X7 📱 Vivo X100 📱 OnePlus Nord 4

Eject Water — OnePlus / Oppo / Vivo →

Google Pixel 8 and 9 series have IP68 rating. Motorola Edge series has IP68. Moto G series has IP52 splash resistance. Pixel phones have a built in water eject feature in the Pixel Sounds app — but our tool works faster and more effectively.

📱 Pixel 9 Pro 📱 Pixel 8 📱 Moto Edge 50 📱 Moto G85

💡 Pixel tip — after using our tool you can also go to Pixel Sounds app and run the built in water eject for a second pass. Double method gives best results.

Eject Water — Motorola / Pixel →

Android IP Ratings — Know Your Protection Level

IP rating tells you how water resistant your Android phone is. Even IP68 phones can suffer water damage in the wrong conditions.

Brand / Model	IP Rating	Water Depth	Safe From
Samsung S24 Ultra	IP68	1.5m / 30 min	Fresh water only
Samsung S23 Ultra	IP68	1.5m / 30 min	Fresh water only
Samsung A55	IP67	1m / 30 min	Splashes only
Google Pixel 9 Pro	IP68	1.5m / 30 min	Fresh water only
OnePlus 12	IP65	Splash resistant	Rain and splashes
Xiaomi 14	IP68	1.5m / 30 min	Fresh water only
Redmi Note 13	IP54	Splash only	Light splashes
Realme C67	None	No rating	Not water resistant
Vivo X100	IP68	1.5m / 30 min	Fresh water only
Moto G85	IP52	Drip resistant	Light rain only

⚠️ IP68 does NOT cover saltwater, swimming pool water, ocean water or pressurised water. All of these can damage even the highest rated Android phones.

Frequently Asked Questions

Does water eject sound work on all Android brands?+

Yes. The sound frequency tool works on every Android brand — Samsung, Xiaomi, Realme, OnePlus, Oppo, Vivo, Motorola and Pixel. The physical mechanism of vibration ejecting water from speaker grille holes is the same regardless of brand.

My Android has no IP rating — will the tool still work?+

Yes. IP rating affects how much water resistance the phone has — not whether the sound tool works. The tool vibrates water out of the speaker grille regardless of IP rating. Use it immediately and do not charge the phone until dry.

How many times should I run the water eject sound?+

Run it 2 to 3 times for best results. After each run wipe the speaker grille area with a dry cloth to remove ejected water droplets. Then run again.

My Samsung speaker still sounds muffled after using the tool — what next?+

If muffled sound persists after 3 runs — the issue may be dust blockage not water. Try our Android Speaker Cleaner tool which uses high frequency sound to remove dust. If still muffled after both tools — could be hardware damage needing Samsung service centre visit.

Can I charge my Android after it got wet?+

Wait at least 1 hour after using the water eject tool before charging. Water in the charging port can cause a short circuit. Most modern Android phones will show a warning if moisture is detected in the charging port.